P.R. Streich and Sons
Rotary Slogan Rotary Logo
Rotary Authorized Installer
Click here for Table of Contents
Click here for Information is Power * Features * Return on Investment
Click here for Features * Models * Model-Specific Comparisons
Click here for Features * Models * Model-Specific Comparisons
Click here for Features * Models
Click here for Features * Models
Click here for Model-Specific Specifications
Click here for Optional Accessories
Click here for Heavy-Duty Products
Accessories





































































































































































MODEL # FJ6137 Required for raising mini-vans with running boards. Adjustable range provides 4 7/8” to 6 3/4” additional height. Rubber contact surface protects undercoated surfaces. Fits any surface mount or inground, frame-engaging, Rotary itt manufactured since October 1973. Includes (4) adapters, mounting rack and hardware.

MODEL # FJ6139 High step rubber pad adapter provides 2 1/2” additional clearance. Fits any frame engaging Rotary lift manufactured since October 1973. Includes 14) Adapters, mounting rack and hardware.

MODEL # FJ6138 Rubber pad adapter for protecting new car undercoating, adds 1/2” additional clearance. Fits any frame engaging Rotary lift manufactured since October 1973. Includes (4) adapters, mounting rack and hardware.

MODEL#FJ6133 Required to lift 1988 or newer General Motors GMT400 pickup trucks. Maximum height 14” depending on lift model. Capacity 2,250 lbs. maximum per adapter. Fits any surface mount or inground, frame-engaging, Rotary lift manufactured since October 1973. Includes (4) adapters, mounting rack and hardware.

MODEL # FJ6115 Auxiliary adapters for use when raising certain vans or pick-ups. Maximum height 143/8” depending on lift model. Capacity 2,250 lbs. maximum per adapter. Fits any surface mount or inground, frame-engaging, Rotary lift manufactured since October 1973. Includes (4) adapters, mounting rack and hardware.

MODEL # FJ7880 Adapter extension kit for SPOA7-RA, SPOA9-RA & SL29RA models ONLY. Provides additional lifting height when vehicles require additional clearance. For use on front or rear to level vehicle on lift. Includes (4) 3.5and (4) 5”adapters, mounting rack and hardware.

MODEL # FA5159 Tool tray kit for models A7i/SPOA7, A9i/SPOA9, S9i/SFO9. Includes two (2) trays, brackets and hardware.

MODEL# FJ6161 Adjustable (HA) screw up adapters with rubber pads allow for protection of underbody vehicle components or undercoating.

MODEL # FJ6100 Includes (4) FJ696, (4) FJ697 and (4) FJ698 plus SP column or wall- mounted adapter organizer rack. Also Available In Different Configurations. Ask Your Distributor For Details.

MODEL # FA915 (SM/SMO) Air/electric utility box includes filter/ lubricator/regulator. Mounts easily on any column. Provides easy access to both air and electrical outlets making the full rise lift a complete work station.

MODEL # FA916 (SM/SMO) Same as above excluding filter/ lubricator/regulator.

MODEL # FA591 1 Includes filter / lubricator / regulator. Mounts easily on any Rotary 2-post surface lift except 84 and 74 series Iiftl. Provides easy access to both air and electrical outlets making the full rise lift a complete work station.

MODEL # FA5910 As above excluding filter/lubricator/regulator.

MODEL # PK2O2SPOA7-225 (Set) Three stage telescoping arms for accommodating smaller vehicles without excessive maneuvering of vehicle. Note: may de-rate lifting capacity. Call factory for details. 1 FT. 2-POST EXTENDED HEIGHT KIT.
MODEL# FJ5107 )A7i/SPOA7),
MODEL# FJ5109 )A9i/SPOA9);
MODEL # FJ51 11 (S9i/SPO9).
2 FT. 2-POST EXTENDED HEIGHT KIT.
MODEL# FJ5108 )A7i/SPOA7),
MODEL # FJ51 10 )A9i/SFOA9);
MODEL # FJ51 12 )59i/SPO9).
4 FT. 2-POST EXTENDED HEIGHT KIT.
MODEL # FJ51 14 (S9i/SPO9 only).
Kits Include Components necessary to gain Overhead Clearance.

MODEL # FC134-17 Magnetic lug-nut tray





MODEL # FC134-17 Portable work step



MODEL # RJ4500 Rolling jack for SM9O/91, ARGO and OL4P. 4,500 lb. capacity.

MODEL # R.J6000 Rolling jack for SMO12i/SM/SM0123 And ARO12i/AR/AR0123. 6,000 lb. capacity.

MODEL # RJ6000-R Rolling jack for SM1 21, SM/SM0122 And AR/AR0122 prior to April 2000. 6,000 lb. capacity. Note: Rubber pad adapters included with above rolling jacks. MODEL#RJ9000-1 Rolling jack for SM18O And SM181 series lifts. 9,000 lb capacity

MODEL # R.i9000-2 Rolling jack for SM300 series lifts. 9,000 lb. capacity. Note: Above rolling jacks have two locking positions

MODEL # FC5710 Heavy Duty Rolling Jack For SM300, Series Lifts. 15,000 lb. Capacity. Air/Oil Operated. Supplied With P0291 Combination Front Straight Axle/”Flip Up” Rear Axle Support. Will Accommodate All Adapters Typically Used With P0282 lnground Saddle. Higher capacity rolling jacks available. Call factory for details.

MODEL#FA51O1 4-wheel alignment upgrade kit for SMO12i/SM/SM0123, SM12O/121/122 series 4-post lifts. Kit consists of, front turning radius gauge kit, rear slip plate kit and all necessary hardware (drilling and tapping required). Recommended for use with (2( rolling jacks for performing 4-wheel alignment.

MODEL # FA5201 Same as FA51 01 with stainless steel radius gauge kit. MODEL # FA5301 Same as FA51 01 without turning radius gauge kit.

MODEL#FA5401 Same as FA51O1 with longer rollback ramps. Ideal for three dimensional aligners.

MODEL # FA5113 4-wheel alignment upgrade kit for SM18O series 4-post lifts. Kit consists of front turning radius gauge kit, rear slip plate kit and all necessary hardware (drilling and tapping required(. Recommended for use with (2) rolling jacks for performing 4-wheel alignment.

MODEL# FC7117 Filler adapter kit for Rotary alignment racks and bolt-on alignment kits to accommodate new three dimensional visual alignment instrumentation systems. Free upon request with purchase of any new Rotary alignment rack or bolt-on kit.

MODEL # FA5154 Stainless steel turning radius gauge kit. Includes two turning radius gauges.

MODEL # FA5155 Standard turning radius gauge kit. Includes two standard turning radius gauges.

MODEL # S 100005 Ramp chock kit for drivethru bay operation for models SMO12i/SM/ SM0122/123 and SM1O1. Ramps have an oil resistant, non-skid coating. includes (2) ramps.

MODEL # S100006 Extended ramp chock kit for models SMO12i/SM/SM0122/123 and SM1O1. Ramps have an oil resistant, non-skid coating. 6 1/2 longer ramp length than standard to reduce ramp up angle for passenger cars with low ground clearance.

MODEL # FC5825 Ramp chock kit for drive-thru bay operation for model SM18O/181. Ramps have an oil resistant, non-skid coating.

MODEL # FC5780-3 Additional Ramp Chocks For Drive-Thru Bay Operation For SM300-200 Series Lifts. Ramps Have An Oil Resistant, Non-Skid Coating.

MODEL#FC5781-7 Extended Ramp Chocks For SM300-200 Series Lifts. Provides 33' Longer Ramp Length Than Standard To Reduce Ramp Up Angle For Passenger Cars And Motor Homes With Low Ground Clearances. Ramps Have An Oil Resistant, Non-Skid Coating.

MODEL # FC5282 20 gallon (75 liter) low profile rolling drain pan with splash guard, drain valve and dust cap for SM/SM0122, SMO12i/SM/SMO123 and quick lube models. able to roll under crosswalk of all QL models.

MODEL # FC5324 30 gallon (114 liter) rolling drain pan with splash guard, drain valve and dust cap for QL4P, SM/SMO122, SMO12i/SM/SMO123 and SM18O.

MODEL#FC5398 30 Gallon 1114 Liter) Rolling Drain Pan With Splash Guard, Drain Valve And Dust Cap. For SM300 Series

MODEL # FC5378 (Pair) Removable work steps for all 4-post series lifts. Support lugs bolt to runways. Some drilling required.

MODEL # FJ2427 (Shown) Flat rubber pad adapter adds 1-1/2 height. (2 Required)

MODEL # FJ2428 Flat rubber pad adapter adds 3” height. (2 Required) Rubber pad surface measures 4-3/4” x 6-5/1 6”. Protects factory applied undercoating on vehicles. 3,000 lbs. capacity per adapter.

MODEL#FJ2423 “All position' arm kit for converting our standard low rise lift arms to versatile rotating arm adapter assemblies. Includes: Set of 4 Arms, adapters and hardware.

MODEL # FJ2280 Optional protective cylinder rod cover is recommended in body shop applications. (For VL Series Lifts.)

MODEL # FJ2354 Same as above for VM series lifts.

Home | Contact Us | Vehicle Lifts | Air Compressors | Tanks | Pumps & Dispensers | Lubrication Systems